Description
2012 Takeuchi TB285 Hydraulic Excavator – 2700 Hours Maintained – Pneumatic
***MORE PICTURES ARE AVAILABLE UPON REQUEST***
All major and minor services have been performed.
You are purchasing a 100% fully functional excavator.
Located in San Diego, California.
We offer financing and can help you with freight.
Please give us a call at 854-871-8341 for more information
We have a large fleet of equipment for sale. Contact us for anything specific that you’re in the market for.
| Operating Weight (w 165 lb operator) Cab | |
| Rubber Track | 18,780 lb (8,518 kg) |
| Steel Track | 19,604 lb (8,892 kg) |
| Maximum Digging Depth | 15 ft 0 in (4,570 mm) |
| Maximum Dump Height | 17 ft 3 in (5,270 mm) |
| Maximum Reach | 24 ft 5 in (7,432 mm) |
| Maximum Bucket Breakout Force | 16,568 lb (7,515 kg) |
| Maximum Arm Digging Force | 8,138 lb (3,691 kg) |
| Arm Length | 7 ft 0 in (2,130 mm) |
| Slew speed | 10.3 rpm |
| Traction Force | 19,783 lb (8,973 kg) |
| Sound Level (noise) | 73 dB(A |
| Make/Model |
Yanmar / 4TNV98T
|
| Tier Rating |
EPA Interim Tier 4
|
| Cylinders/Displacement |
4/202 cu in (3.3 L)
|
| Horsepower |
69.2 hp (51.6 kW)
|
| Rated Engine Speed |
2,000 rpm
|
| Maximum Torque |
223 ft-lb @ 1,475 rpm (302 Nm)
|
| Engine Lubrication |
10.8 qt (10.2 L)
|
| Cooling System |
14.8 qt (14.0 L)
|
| Fuel Tank Capacity |
33.8 gal (128 L)
|
| Fuel Consumption (65% of full load) |
2.6 gal/hr (9.9 L/hr)
|
| Electrical System |
12 volts / 80 amps
|
| Traction Drive Type | Planetary reduction with automatic shift down |
| Parking Brake | Spring applied, hydraulically released, multiple wet friction disk |
| Track Roller Type | Permanently sealed, triple flanged rollers |
| Track Rollers (per side) | 5 |
| Track Width | |
| Rubber | 17.7 in (450 mm) |
| Steel | 21.7 in (550 mm) |
| Track Ground Contact Length | 7 ft 3 in (2,210 mm) |
| Ground Pressure | Rubber Steel |
| 5.5 psi 4.8 psi | |
| Maximum Travel Speed | |
| Low Range | 1.6 mph (2.6 km/hr) |
| High Range | 3.1 mph (5.0 km/hr) |
| Pump Type |
Load sensing piston pumps w/ two gear pumps
|
| Total Hydraulic Flow (gpm) |
42.3 + 16.0 + 4.2
|
| Primary Auxiliary Hydraulic Flow |
26.4 gal/min (100.0 L/min)
|
| Secondary Auxiliary Hydraulic Flow |
14.5 gal/min (55.0 L/min)
|
| Main Relief Hydraulic Pressure |
3,990 psi (27.5 MPa)
|
| Hydraulic Reservoir Capacity |
19.3 gal (73.0 L)
|
| Hydraulic System Capacity |
37.0 gal (140 L)
|
| Max Dig Depth |
15 ft 0 in (4,570 mm)
|
| Max Dump Height |
17 ft 3 in (5,270 mm)
|
| Max Reach Ground Level |
24 ft 5 in (7,435 mm)
|
| Max Vertical Dig Depth |
12 ft 6 in (3,805 mm)
|
| Width |
7 ft 7 in (2,300 mm)
|
| Height |
8 ft 5 in (2,565 mm)
|
| Length (Transport) |
21 ft 10 in (6,660 mm)
|
| Ground Clearance |
15 in (385 mm)
|
| Dozer Blade Height |
19.7 in (500 mm)
|
| Independent Boom Swing Angle (L/R) |
70° Left / 60° Right
|
| Min Front Swing Radius (Straight) |
8 ft 2 in (2,495 mm)
|
| Min Front Swing Radius (Offset) |
6 ft 8 in (2,030 mm)
|
| Tail Swing Radius |
5 ft 8 in (1,720 mm)
|
| Lift Capacities at 9 ft 8 in (3.0m) radius | ||
|
Over Front, Blade Down
|
Over Side
|
|
| +3 ft 3 in (1.0 m) |
8,584 lb (3,894 kg)
|
5,484 lb (2,488 kg)
|
| Ground Level |
8,530 lb (3,869 kg)
|
5,274 lb (2,392 kg)
|
| -3 ft 3 in (-1.0 m) |
10,863 lb (4,927 kg)
|
5,243 lb (2,378 kg)
|
ENGINE
- EPA Interim Tier 4 compliant, turbocharged
- Automatic fuel bleed system
- Extended life coolant
- Dual element air cleaners
- Automatic idle
- Selectable work modes
- Automatic preheat
- Large capacity radiator
- High capacity fuel filters
ELECTRICAL
- Instrumentation includes: hour meter, fuel gauge, coolant temperature gauge, visual and audible alarms for low engine oil pressure, high engine coolant temperature, air filter restriction, charge level
- 12 Volt system with 80 amp alternator
- Multi function switch bank
- Front and side halogen work lights
- Engine preheat
- Travel alarm
- Horn
UNDERCARRIAGE and FRAME
- Triple flange track rollers
- Automatic track tensioning system
- Sloped frame with open centers
- 2 Speed travel with automatic shift
- High torque planetary final drives
- Heavy duty dozer blade with float
- Cast iron wrap around protective counterweight
- 17.7″ Rubber tracks
- Available 21.7″ Steel tracks
- Available power angle blade, angles 25° right and left
HYDRAULIC
- Load sensing hydraulic system
- Cushioned boom and arm cylinders
- Precise and responsive pilot controls
- Primary auxiliary circuit plumbed to arm with 1 – way and 2 – way operation
- Primary auxiliary circuit with 3 selectable modes and in cab flow adjustments
- Second auxiliary circuit with adjustable flow control system
- High flow auxiliary hydraulics, 25.6 gpm
- Accumulator
- Hydraulic oil cooler and sight gauge
- Auxiliary detent (Primary circuit)
WORKING EQUIPMENT
- Dual boom cylinders
- Boom holding valve with lift alarm
- Long arm with integrated thumb mount
- Available dual pin position bucket
- Available mechanical bucket quick coupler
- Available main pin hydraulic thumb
OPERATOR’S STATION
- ROPS / FOPS Protection
- Adjustable, cloth covered high back suspension seat
- Quick change control pattern (ISO or SAE)
- Proportional slide switch for auxiliary hydraulics
- Automatic climate control system for air conditioning and heat
- AM / FM / Mp3 radio
- 2″ Seat belt
- Available 3″ Seat belt
