Description
2006 Hyundai HL770-7 Wheel Loader
Cab w/ AC/Heat 4X4 Cummins Diesel – 70.3 Hours
Equipped With
5.5 Cu.Yd. Bucket w/ Teeth & Reinforced Side Plates
Description
In working condition. Was used for towing recovery work. When a large truck would flip over on the highway and lose it’s load, this wheel loader was used to quickly clean the highway. The rear tires will need to be replaced soon and the front tires will need replacing not long after that. This loader sits outside most of the time so it has developed some slow hydraulic fluid leaking from 2 of the 3 main loader arm cylinders. The leaks are slow and it has not created an issue when operating the loader. Engine starts right up and overall the machine is in good condition for its age. There is some minor damage to some of the lower foot steps on both sides of the loader but the damage does not effect usability. The damage is primarily cosmetic. This loader has very low hours for its age.
We offer financing and shipping on this loader. We are happy to provide you with a freight quote upon request.
|
Bucket
|
||
| G. DUMP CLEARANCE AT MAX RAISE | 10.4 ft in | 3177 mm |
|
Dimensions
|
||
| A. LENGTH WITH BUCKET ON GROUND | 28.3 ft in | 8635 mm |
| B. WIDTH OVER TIRES | 9.8 ft in | 2975 mm |
| C. HEIGHT TO TOP OF CAB | 11.6 ft in | 3550 mm |
| D. WHEELBASE | 11.3 ft in | 3440 mm |
| E. GROUND CLEARANCE | 1.6 ft in | 480 mm |
| F. HINGE PIN – MAX HEIGHT | 14.1 ft in | 4310 mm |
| H. REACH AT MAX LIFT AND DUMP | 4.1 ft in | 1254 mm |
Specification
| Engine | ||
| NUMBER OF CYLINDERS | 6 | |
| MAKE | 2347 | |
| MODEL | QSC8.3-C | |
| NET POWER | 266 hp | 198.4 kw |
| GROSS POWER | 280 hp | 208.8 kw |
| POWER MEASURED @ | 2200 rpm | |
| DISPLACEMENT | 506.5 cu in | 8.3 L |
| TORQUE MEASURED @ | 1400 rpm | |
| MAX TORQUE | ||
| ASPIRATION | turbocharged | |
| Operational | ||
| OPERATING WEIGHT | 50265.4 lb | 22800 kg |
| FUEL CAPACITY | 113.6 gal | 430 L |
| HYDRAUILC SYSTEM FLUID CAPACITY | 84.5 gal | 320 L |
| ENGINE OIL FLUID CAPACITY | 5.3 gal | 20 L |
| COOLING SYSTEM FLUID CAPACITY | 14.8 gal | 56 L |
| TRANSMISSION FLUID CAPACITY | 13.7 gal | 52 L |
| FRONT AXLE/DIFF FLUID CAPACITY | 20.6 gal | 78 L |
| REAR AXLE/DIFF FLUID CAPACITY | 14 gal | 53 L |
| STATIC TIPPING WEIGHT | 37700 lb | 17100.4 kg |
| OPERATING VOLTAGE | 24 V | |
| ALTERNATOR SUPPLIED AMPERAGE | 70 amps | |
| REAR AXLE OSCILLATION | 26 degrees | |
| TIRE SIZE | 26.5-25, 20 PR L3 | |
| Transmission | ||
| TYPE | 3-elements, single-stage, single-phase | |
| NUMBER OF FORWARD GEARS | 4 | |
| NUMBER OF REVERSE GEARS | 3 | |
| MAX SPEED – FORWARD | 23.6 mph | 38 km/h |
| MAX SPEED – REVERSE | 16.3 mph | 26.3 km/h |
| Hydraulic System | ||
| PUMP TYPE | open-centered, tandem circuit system | |
| RELIEF VALVE SETTING | ||
| PUMP FLOW CAPACITY | 108.6 gal/min | 411 L/min |
| RAISE TIME | 5.7 sec | |
| DUMP TIME | 1.4 sec | |
| LOWER TIME | 2.8 sec | |
| Bucket | ||
| BREAKOUT FORCE | 45770 lb | 203.6 kN |
| DUMP CLEARANCE AT MAX RAISE | 10.4 ft in | 3177 mm |
| BUCKET WIDTH | 10.2 ft in | 3100 mm |
| BUCKET CAPACITY – HEAPED | 5.2 yd3 | 4 m3 |
| BUCKET CAPACITY – STRUCK | 4.5 yd3 | 3.5 m3 |
| Dimensions | ||
| LENGTH WITH BUCKET ON GROUND | 28.3 ft in | 8635 mm |
| WIDTH OVER TIRES | 9.8 ft in | 2975 mm |
| HEIGHT TO TOP OF CAB | 11.6 ft in | 3550 mm |
| GROUND CLEARANCE | 1.6 ft in | 480 mm |
| WHEELBASE | 11.3 ft in | 3440 mm |
| HINGE PIN – MAX HEIGHT | 14.1 ft in | 4310 mm |
| REACH AT MAX LIFT AND DUMP | 4.1 ft in | 1254 mm |
