Description
Baileigh Lathe, Model PL-1440E, Fully Assembled, 2 Axis Digital Readout, 6″ 3 Jaw Chuck
Baileigh Lathe, Model PL-1440E, Fully Assembled, 2 Axis Digital Readout, 6″ 3 Jaw Chuck, 8″ 4 Jaw Chuck, Face Plate, Steady Rest, Follow Rest, Live Center, Quick Change Tool Holder, Foot Brake, Coolant System With Splash Guard, Removable Chip Tray, Micrometer Saddle Stop, Halogen Work Light, 220V / 1-Phase
***Please Call 854-871-8341 For More Information***
DETAILED SPECIFICATION
| Capacity | |
|---|---|
| Maximum Swing Over Bed | 14″ |
| Maximum Swing Over Cross Slide | 8.6″ |
| Maximum Swing Over Gap Diameter | 19.9″ |
| Center Length | 40″ |
| Width of Bed | 7.086″ |
| Length of Bed | 40″ |
| . | |
| Spindle Nose | D1 – 4″ |
| Spindle Bore | 1.50″ |
| Spindle Bore Taper | Morse #5 |
| Spindle Speeds | 8 |
| 70 – 2000 rpm | |
| Top Slide Travel | 2.68″ |
| Cross Slide Travel | 6.29″ |
| Maximum Tool Selection | 0.625″ x 0.625″ |
| Leadscrew Thread Pitch | 8 TPI |
| Longitudinal Feed Range | 0.002″ – 0.0548″/rev |
| Cross Feed Range | 0.007″ – 0.0187″/rev |
| Metric Thread Range | 0.4 – 7mm |
| Inch Thread Range | 0.0157″ – 0.275″ |
| Sleeve Diameter | 1.65″ |
| Sleeve Travel | 4.5″ |
| Sleeve Taper | Morse #3 |
| Horsepower | 2 H.P. |
| Power Requirement | 110V / 1-Phase |
| Dimension (L x W x H) | 79″ x 33″ x 59″ |
| Weight | 1430 lbs |
EQUIPPED WITH
| Micrometer Saddle Stop |
| Fully Assembled |
| 2 Axis Digital Readout |
| 6″ 3 Jaw Chuck |
| 8″ 4 Jaw Chuck |
| Face Plate |
| Steady Rest |
| Follow Rest |
| Live Center |
| Quick CHange Tool Holder |
| Foot Brake |
| Coolant System With Splash Guard |
| Removable Chip Tray |
| Halogen Work Light |
| 220V / 1-Phase |
